Laboratory Shower
Safety Showers for Laboratory and other rooms
Emergency showers reduce risk to employees who work with hazardous chemicals. The emergency shower must be accessible within 10 seconds of the work space. For the laboratory worker or other employees, nothing is more important than lab safety. Lab is not safe without an eyewash station and emergency shower.
Table Eyewash with double head
TABLE EYEWASH WITH DOUBLE HEAD
no. 3130
MATERIALS: Flexible hose in stainless steel. Fittings in brass.
COATING: Anti-corrosive polyamide 11, high-visibility yellow plastic.
WATER INLET: 1/2″
PRESSURE: Rec. 2 bar, Min. 1,5, Max 8 bar.
Emergency ceiling drench shower stainless steel shower head
Ceiling mounted drench shower with lever operation
no.1100E
Materials
Steel construction galvanized
ABS/Stainless steel Bowls
Valves Brass
Paint ( Plastic coating) Rilsan.
Connections
1″ BSP female
Specification
Conforms to the requirements of: DIN EN 15154/1.2006
ANSI-Z358-1-2004
»Technical Drawing
Movable laboratory table emergency eye wash, spray deck-mounting single head
TABLE EYEWASH WITH SINGLE HEAD
no. 3120
MATERIALS: Flexible hose in stainless steel. Fittings in brass.
COATING: Anti-corrosive polyamide 11, high-visibility yellow plastic.
WATER INLET: 1/2″
PRESSURE: Rec. 2 bar, Min. 1,5, Max 8 bar.
LAVA-OJOS
MATERIALS: An aerated water spray with automatic anti-dust cover.
Recessed eye wash with push control. Stainless steal bowl
TABLE RECESSED EYEWASH
no. 2215SS
MATERIALS: Galvanized steel piping. Brass fittings and Elbows.
COATING: Anti-corrosive polyamide 11, high-visibility yellow plastic.
WATER INLET: 1/2″
PRESSURE: Rec. 2 bar, Min. 1,5, Max 8 bar.
EYEWASH
MATERIALS: Two high-flow aerated water spray heads at low pressure with automatic opening anti-dust cover. Eyewash assembly in plastic ABS. Recessed box in stainless steel.
FLOWRATE: Regulated at22 l/min
OPERATION: Push handle
VALVE: 1/2″
WASTE: 1 1/4″
Fixed eye wash wall mounted
EYEWASH WITHOUT BOWL
no.3510
MATERIALS: Fittings in brass.
COATING: Anti-corrosive polyamide 11, high-visibility yellow plastic.
WATER INLET: 1/2″
PRESSURE: Rec. 2 bar, Min. 1,5, Max 8 bar.
EYEWASH
MATERIALS: Two high-flow aerated water spray heads at low pressure with automatic opening anti-dust cover. Eyewash assembly in plastic ABS.
FLOWRATE: Regulated at22 l/min
VALVE: 1/2″
Eye wash wall mounted stainless steel
EYEWASH STAINLESS STEEL NO BOWL
no. 3510TI
MATERIALS: All in stainless steel.
WATER INLET: 1/2″
PRESSURE: Rec. 2 bar, Min. 1,5, Max 8 bar.
EYEWASH
Two high-flow aerated water spray heads at low pressure with automatic opening anti-dust cover. Eyewash assembly in stainless steel.
FLOWRATE: Regulated at22 l/min
OPERATION: Push handle
VALVE: 1/2″
»Technical Drawing
Emergency Eye Wash Wall Mounted
EYEWASH ABS BOWL, WAll MOUNTED
no.2210
MATERIALS: Galvanized steel piping. Brass fittings and Elbows.
COATING: Anti-corrosive polyamide 11, high-visibility yellow plastic.
WATER INLET: 1/2″
PRESSURE: Rec. 2 bar, Min. 1,5, Max 6 bar.
EYEWASH
MATERIALS: Two high-flow aerated water spray heads at low pressure with automatic opening anti-dust cover. Eyewash assembly in plastic ABS. Eyewash bowl in plastic ABS.
FLOWRATE: Regulated at 22 l/min
OPERATION: Push handle
VALVE: 1/2″
WASTE: 1 1/4″
»Technical Drawing
»Send me a quotation
Eye wash mounted bracket/stainless steel bowl
Wall mounted fixed twin eyewash heads,bowl stainless steel
no.2210E
MATERIALS: Galvanized steel piping. Bowl stainless steel
COATING: Anti-corrosive polyamide 11, high-visibility yellow plastic.
WATER INLET: 1/2″
PRESSURE: Rec. 2 bar, Min. 1,5, Max 6 bar.
EYEWASH
MATERIALS: Two high-flow aerated water spray heads at low pressure with automatic opening anti-dust cover. Eyewash Stainless steel,
FLOWRATE: Regulated at 22 l/min
OPERATION: Push handle
VALVE: 1/2″
WASTE: 1 1/4″
Eye wash wall mounted stainless steel
Wall mounted fixed twin eyewash heads and bowl, stainless steel
no. 2210TI
MATERIALS: Stainles steel
WATER INLET: 1/2″
PRESSURE: Rec. 2 bar, Min. 1,5, Max 6 bar.
EYEWASH
Two high-flow aerated water spray heads at low pressure with automatic opening anti-dust cover. Eyewash Stainless steel,
FLOWRATE: Regulated at 22 l/min
OPERATION: Push handle
VALVE: 1/2″
WASTE: 1 1/4″
»Technical Drawing
Eye Wash Stainless Steel
EYEWASH STAINLESS STEEL
no. 2220TI
MATERIALS: Pipe and fittings in stainless steel.
WATER INLET: 1/2″
PRESSURE: Rec. 2 bar, Min. 1,5, Max 8 bar.
EYEWASH
MATERIALS: Two high-flow aerated water spray heads at low pressure with automatic opening anti-dust cover. Eyewash assembly in stainless steel. Eyewash bowl in stainless steel.
FLOWRATE: Regulated at22 l/min
OPERATION: Push handle
VALVE: 1/2″
WASTE: 1 1/4″
Pedestal eye wash fountain abs bowl
PEDESTAL EYE WASH FOUNTAIN ABS BOWL
no. 2220
MATERIALS: Galvanized steel piping. Brass fittings and Elbows.
COATING: Anti-corrosive polyamide 11, high-visibility yellow plastic.
WATER INLET: 1/2″
PRESSURE: Rec. 2 bar, Min. 1,5, Max 8 bar.
EYEWASH
MATERIALS: Two high-flow aerated water spray heads at low pressure with automatic opening anti-dust cover. Eyewash assembly in plastic ABS. Eyewash bowl in plastic ABS
FLOWRATE: Regulated at22 l/min
OPERATION: Push handle
VALVE: 1/2″
WASTE: 1 1/4″
Emergency Eye wash spray unit wite single haed
EMERGENCY SPRAY UNIT WITH SINGLE HEAD
no. 3000
MATERIALS: Flexible hose in stainless steel. Fittings in brass.
COATING: Anti-corrosive polyamide 11, high-visibility yellow plastic.
WATER INLET: 1/2″
PRESSURE: Rec. 2 bar, Min. 1,5, Max 8 bar.
EYEWASH
MATERIALS: An aerated water spray with automatic anti-dust cover.
Emergency Eye wash spray unit with wall feeding bracket
EMERGENCY SPRAY UNIT WITH SINGLE HEAD AND WALL FEEDING BRACKET
no. 3100
MATERIALS: Flexible hose in stainless steel. Fittings in brass.
COATING: Anti-corrosive polyamide 11, high-visibility yellow plastic.
WATER INLET: 1/2″
PRESSURE: Rec. 2 bar, Min. 1,5, Max 8 bar.
EYEWASH
MATERIALS: An aerated water spray with automatic anti-dust cover.
Emergency Eye wash spray unit (eyes/body) wall mounting twin heads
EMERGENCY Eye Wash SPRAY UNIT WITH WALL FEEDING BRACKET
no. 3110
MATERIALS: Flexible hose in stainless steel. Fittings in brass.
COATING: Anti-corrosive polyamide 11, high-visibility yellow plastic.
WATER INLET: 1/2″
PRESSURE: Rec. 2 bar, Min. 1,5, Max 8 bar.
EYEWASH
MATERIALS: Two high-flow aerated water spray heads at low pressure with automatic opening anti-dust cover. Distribuidor lavaojo en plastico ABS.
Vertical drench shower ABS shower head
Ceiling mounted drench shower with lever operation
no.1100
Materials
Steel construction galvanized
ABS/Stainless steel Bowls
Valves Brass
Paint ( Plastic coating) Rilsan.
Connections
1″ BSP female
Specification
Conforms to the requirements of: DIN EN 15154/1.2006
ANSI-Z358-1-2004
»Technical Drawing
Door controls safety shower ABS shower head
Wall/Over door mounted drench shower with lever operation
no. 1140
MATERIALS: Galvanized steel piping. Brass fittings and Elbows.
COATING: Anti-corrosive polyamide 11, high-visibility yellow plastic.
WATER INLET: 1″
PRESSURE: Rec. 2 bar, Min. 1,5, Max 8 bar.
SHOWER
MATERIALS: Showerhead in plastic ABS.
FLOWRATE: Regulated at110 l/min.
OPERATION: Pull handle
VALVE: 1″
Horizontal shower stainless steel
no. 1110TI
MATERIALS: Pipe and fittings in stainless steel
WATER INLET: 1″
PRESSURE: Rec. 2 bar, Min. 1,5, Max 8 bar.
SHOWER
MATERIALS: Showerhead in stainless steel.
FLOWRATE: Regulated at110 l/min.
OPERATION: Pull handle
VALVE: 1″
»Technical Drawing
Combination Shower/Eye Wash - Stainless Steel
SHOWER/EYE WASH, STAINLESS STEEL
no. 4220TI
MATERIALS: Pipe and fittings in stainless steel.
WATER INLET: 1 1/4″
PRESSURE: Rec. 2 bar, Min. 1,5, Max 8 bar.
SHOWER
MATERIALS: Showerhead in stainless steel.
FLOWRATE: Regulated at 110 l/min.
OPERATION: Pull handle
VALVE: 1″
WASTE: —-
EYEWASH
MATERIALS: Two high-flow aerated water spray heads at low pressure with automatic opening anti-dust cover. Eyewash assembly in stainless steel. Eyewash bowl in stainless steel.
FLOWRATE: Regulated at 22 l/min
OPERATION: Push handle
VALVE: 1/2″
WASTE: 1 1/4″
»Technical Drawing
Combination Emergency Shower/Eye Wash
Floor mounted drench shower with lever operation, fixed eyewash
no.4220
Materials
Steel construction galvanized
ABS Bowls
Valves Brass
Paint ( Plastic coating) Rilsan
Connections
1 1/4″ BSP female
Specification
Conforms to the requirements of: DIN EN 15154/1.2006
ANSI-Z358-1-2004
Vertical drench shower stainless steel
no. 1100TI
Ceiling mounted drench shower with lever operation
Materials
Pipe and fittings in stainless steel construction
Connections
1″ BSP female
Specification
Conforms to the requirements of: DIN EN 15154/1.2006
ANSI-Z358-1-2004
»Technical Drawing
